How to Troubleshoot an Electric Dab Rig That's Not Working - Puffingmaster

How to Troubleshoot an Electric Dab Rig That's Not Working

How to Make a Homemade Dab Rig Leiendo How to Troubleshoot an Electric Dab Rig That's Not Working 6 minutos Siguiente Your Guide to Nectar Collectors

Technology has significantly influenced how we consume cannabis, with electric dab rigs being one of the most revolutionary developments. These devices offer convenience, consistency, and control, enhancing the dabbing experience. However, like all electronic devices, they may occasionally encounter issues. This blog post will guide you through troubleshooting your electric dab rig when it's not working properly.

What Is an Electric Dab Rig?

An erig, alternatively referred to as an electric dab rig, is an innovative gadget designed to utilize cannabis concentrates. Instead of touch, an erig employs a battery to function and warm up a nail. This advanced approach to dabbing bestows upon the user the ability to regulate the dab's temperature.

An electric dab rig signifies an optimum enhancement for your dabbing routine, providing a more mechanized method for dabbing by incorporating sophisticated capabilities that undertake strenuous tasks on your behalf, such as warming up the nail, eliminating the necessity for a torch. However, occasional troubleshooting may be required to maintain optimal functionality like any electronic device. Allow us to explore the prevalent challenges erig users encounter and the straightforward remedies that can rectify them.

Quick Disclaimer

Each electric dab rig is different, so we recommend you consult your user manual if you encounter any issues. Almost all included user manuals that come with erigs offer a troubleshooting section, and often, the problem you've run into has a very simple fix that can be remedied quickly by following the manufacturer's instructions. Besides that, you can always contact the manufacturer and ask them to help you determine why a problem has occurred. Erigs usually come with warranties, so if the issue is because of faulty equipment, it might be better to request a replacement rather than trying to fix the piece yourself.

Verify the Power Source:

First and foremost, ensure that your electric dab rig is properly connected to a power source. If you are using a battery-operated device, check if the batteries are charged. If they're dead or weak, replace or recharge them. If your dab rig is directly powered via a socket, ensure the socket itself is operational by testing it with another device.

Check Electrical Connections:

Inspect the electrical connections of your dab rig. Loose or broken connectors can disrupt the power supply, causing the rig to malfunction. If you notice any damage, contact the manufacturer or a professional for repair or replacement parts.

Check the Atomizer/Coil:

Typically, when a coil or atomizer fails to warm up, your dab rig will indicate a short circuit problem by a flickering light sequence. The LED indicators on most devices will blink thrice to signal this.

There are 3 primary reasons for a short circuit to occur:

1). The atomizer or coil is either excessively tightened or improperly mounted.

Rectifying this is straightforward – detach the atomizer or coil and affix it back to your device's base, ensuring the threads are properly aligned.

2). The contact points on either the atomizer/coil or the base of the device are unclean.

Begin by detaching the atomizer/coil, then scrutinize the contact points at the bottom of the atomizer/coil and the base. If any residue is present, clean it using a cotton swab moistened with isopropyl alcohol. Ensure all components are fully dry before reassembly.

Neglecting atomizer/coil maintenance can result in stubborn buildup that affects both the taste and the longevity of your atomizer or coil. Improper cleaning or water damage can also lead to the atomizer or coil failure. Never allow your atomizer or coil to come into contact with excessive water or other liquids unless the manufacturer specifically states that it is safe. Always refer to the user manual for appropriate cleaning methods.

3). The atomizer or coil is exhausted and needs replacement.

The most frequent cause of atomizer/coil wear and tear is due to users running heating cycles consecutively, which can lead to the heating element's degradation. Over time, this kind of use weakens the heating element until it breaks. If the electrical flow within the heating element is interrupted, your atomizer or coil becomes unresponsive, resulting in a short circuit error.

Unintentional "flooding" can lead to premature wear on the atomizer or coil. This happens when the device temperature is too low to vaporize a large quantity of concentrates ("flooding"). The rate of saturation is crucial. Regardless of the type of device you're using – be it an electric nectar collector, an enail, an electric dab rig, or a standard bucket banger with a torch, it's essential to heat the dabbing surface adequately to vaporize the amount of concentrate you're loading, or else you risk encountering problems of varying severity.

Assess the Temperature Settings:

If your dab rig is turning on but not reaching the desired temperature, it might be an issue with the temperature settings. Make sure you're setting the temperature correctly as per the user manual. If the device doesn't heat up even after the correct temperature settings, it might be a technical fault requiring professional assistance.

Inspect the Airflow:

Inadequate airflow can prevent your electric dab rig from functioning correctly. Check if the air paths are clear or blocked due to resin build-up or any foreign material. Regular cleaning of the air paths using appropriate cleaning solutions can help maintain optimal airflow.

Firmware Updates:

Your electric dab rig's firmware might need an update. Manufacturers often release updates to fix bugs and improve performance. Check the manufacturer's website or app for any available updates.

Contact Customer Support:

If you've tried all the above troubleshooting steps and your electric dab rig is still not working, it's time to reach out to customer support. The problem could be a complex hardware or software issue that requires professional attention.


Troubleshooting an electric dab rig can be a straightforward process if you understand the basic components and their functions. Regular maintenance and proper handling can significantly reduce the chances of encountering problems. However, if issues persist, don't hesitate to seek professional help to avoid further damage or voiding your warranty.

Remember that troubleshooting processes can vary depending on the model and manufacturer of your electric dab rig, so always refer to the instruction manual provided with your device for specific guidance.

Leave a comment

All comments are moderated before being published.

Este sitio está protegido por reCAPTCHA y se aplican la Política de privacidad de Google y los Términos del servicio.